XC-DPG503

Twin WAN VPN Gateway

Bandwidth Expansion and VPN Networking

XINCOM's XC-DPG503 Twin WAN VPN Gateway allows your business to expand its available bandwidth for network users while providing reliable connectivity to the Internet and secure VPN networking for remote clients.

Rear View

VPN Gateway-to-Gateway Failover

XINCOM XC-DPG503 is a VPN capable Dual WAN Gateway with industry standard IPsec encryption. It provides extremely secure Gateway-to-Gateway connectivity over the Internet. The 503 supports VPN by encryption, encapsulation, and authentication using the following methods: DES/3DES/AES, MD5, SHA-1 and SHA-2; up to 30 IPsec tunnels are permitted. VPN connection redundancy is maintained by VPN Auto Failover. In the event of a VPN tunnel failing, the XC-DPG503 will re-establish the tunnel with the second WAN port connection.

Reliable & Redundant Internet Access

Using two separate ISPs provides redundant connectivity to the Internet. In the event that one ISP goes down, the XC-DPG503 automatically fails over to the other ISP service. Redundancy to the Internet provides a truly uninterrupted connection for a business's customers while maintaining uptime and productivity for its employees.

Advanced Features & Robust Security

Two WAN ports that allow you to connect two separate broadband connections of any type, including Cable, DSL and/or T1 for ultimate automatic failover and full load balancing services. The XC-DPG503 also features NAT, a Stateful Packet Inspection Firewall, DHCP server, Access Filters, and VPN pass-through to secure a business’s network services. The Quality of Service (QoS) feature schedules and directs a network’s traffic to take advantage of available bandwidth. UPnP support can dynamically open and close ports required by certain software automatically. Increased bandwidth and redundant connectivity to the Internet provides cost-effective bandwidth solutions to expensive leased telecommunication lines for your network infrastructure.

Benefits

  • Increase your bandwidth with two concurrent broadband connections
  • Maximize uptime for your network
  • Provides a secure and reliable connection to the Internet
  • Automated failover services for VPN tunnels keeps your network online and secure to remote clients

 

 

How it Works

Basic VPN setup with the XC-DPG503 Twin WAN Gateway:

VPN Setup

The 503 VPN Gateways serve as VPN endpoints with Auto Failover capabilities. This creates a secure tunnel and redundant connectivity for a Virtual Private Network.

WAN

  • 2-port 10/100 Mbps RJ-45
  • Auto-MDI/MDIX; 802.3/802.3u

LAN

  • 4-port 10/100 Mbps RJ-45
  • Auto-MDI/MDIX; 802.3/802.3u

Throughput

  • 50 Mbps bidirectional throughput (WAN)

Load Balance & Backup

  • Outbound load balance by bytes, packet, session, & IP Address
  • Automatic backup connection (Auto-Failover mode)

Protocols

  • Security: NAT, UPAP, CHAP
  • Network: TCP/IP, DHCP, PPP, UPAP, PPPoE, Multi-session PPPoE
  • Routing: static route for WAN & LAN, ICMP, ARP Proxy, HTTP, RIP I/II
  • Connection: static IP, dynamic IP, PPPoE, PPTP

VPN

  • Gateway-to-Gateway Endpoint
  • IPSecTunnels: 30
  • Encryption: DES(56-bit), 3DES(168-bit), & AES(128-bit)
  • VPN throughput: 10 Mbps
  • Pass through support for IPSEC, PPTP, and L2TP
  • PPTP client

Firewall

  • Stateful Packet Inspection
  • NAT (Network Address Translation)
  • NAPT (Network Address Port Translation)
  • DoS (Denial of Service)
  • Access control by group
  • Ping to Death
  • ICMP filter for WAN
  • Packet filter
  • URL block

Security

  • Admin passwords
  • Authentication with UPAP and CHAP for PPPoE

Management

  • Management through WAN & LAN port
  • HTTP web based management
  • Email alert of disconnection

Firmware Upgrade

  • HTTP web based download
  • TFTP download

Applications

  • Support MSN & Net meeting
  • Support with H.323 VoIP products
  • Multi-session PPPoE
  • SMTP bind
  • SNMP
  • NAT status & connection list
  • Virtual server
  • Multi-DMZ
  • MTU changeable for WAN
  • Dial-on-demand & Auto-disconnect
  • Dynamic DNS
  • MAC address clone
  • Transparent Bridge Mode

Hardware

  • RISC 170 Mhz Processor
  • 1Mb Flash memory
  • 16Mb RAM

Supported OS

  • Win98 / Win2000 / WinMe / WinXP / Vista/ MAC OS X / Linux

Power

  • External Power Adapter
  • Input: 5Vdc@1A

Operating Environment

  • 32°F (0°C) to 104°F (40°C)
  • Humidity: 20 - 95% non-condensing

Storage Temperature

  • -4°F (-20°C) to 158°F (70°C)

Certification

  • FCC Class B; CE; LVD

Dimensions

  • 9.63in / 244mm (W) x 5.63in / 143mm (D) x 1.18in / 30mm (H) / 1.15lbs / 521g (wt.)