Section 3: SNMP (Simple Network Management Protocol)
This section is to compliment any SNMP (Simple Network Management Protocol) software installed on your PC. If you have SNMP software, you can use a standard MIB II file with the Twin WAN Gateway.
Figure 25. SNMP Console |
SNMP - Settings
Enable - The name of the individual responsible for this device.
Device Name - Enter a name for the Twin WAN Gateway.
Physical Location - The location of the Twin WAN Gateway.
Set these field settings as required from your SNMP software.
Enter the IP address of any targets (PCs running SNMP software) to which you want traps to be sent. All traps are level 1.
