XiNCOM
Broadband your Network
 

User Guide
Twin WAN Series


Chapter 2 - Advanced Port

Table of Contents
 
Download manual in PDF format -
[ Download ]

Section 4: Advanced PPPoE

The Advanced PPPoE console is required in order to use multiple PPPoE sessions on the same WAN port. It can also be used to manually connect or disconnect a PPPoE session.


Figure 8. Advanced PPPoE Console

Advanced PPPoE Console - Settings

WAN Port PPPoE Session
Select the desired Port and Session, then click the Select button. The data for the selected Port/Session will then be displayed in the WAN IP Account section.

WAN IP Account

  • User Name – Enter the PPPoE user name assigned by your ISP.
  • Password – Enter the PPPoE password assigned by your ISP.
  • Verify Password – Re-enter the PPPoE password assigned by your ISP.
  • IP Address – If you have a fixed IP address, enter it here. Otherwise, this field should be left at 0.0.0.0.
  • Host Name – This field is used by a Host to uniquely associate an access concentrator to a particular Host request.

Action
Use the Connect and Disconnect buttons to establish or terminate a connection on this session.

Connection Status
This displays the current connection status for each session.

1 | 2 | 3 | 4 | 5